Iridium GO! exec - Iridium GO! exec App

The Iridium GO! exec app is the primary mobile application used to manage your Iridium GO! exec device. It provides access to calling, messaging, settings, and device status information directly from your smartphone or tablet.

What the Iridium GO! exec app is used for

• Place and receive satellite calls through your smart device.

• View signal strength, battery level, network status, and active sessions.

• Manage device settings such as Wi-Fi credentials, power configuration, and firmware updates.

• Monitor and control data usage.

• Receive device notifications through Bluetooth.

• Access SOS configuration (setup is completed on the device, but managed through the app).

Before you begin

• Download the Iridium GO! exec app from the Apple App Store or Google Play.

• Ensure Wi-Fi and Bluetooth are enabled on your smart device.

• Ensure your device firmware is up to date (the app provides firmware update prompts when available).

Connecting the app to the Iridium GO! exec

1. Turn on the Iridium GO! exec by lifting the antenna or holding the power button.

2. On the GO! exec screen, tap Settings, and select Show Wi-Fi Access Credentials to view the QR code, SSID, and password.

3. Open the Iridium GO! exec app on your smart device.

4. When prompted, scan the QR code to connect automatically.

If you prefer to connect manually:

1. Go to your smart device’s Wi-Fi settings.

2. Select the network name “Iridium-XXXXXX” shown on the GO! exec screen.

3. Enter the default password: password

4. Reopen the app, and it will connect automatically.

Key features of the app

• Call Screen: Allows you to dial, receive, and manage satellite calls using your smart device.

• Session Monitor: Displays active data sessions and provides tools to manage usage.

• Device Dashboard: Shows device status, including registration state, battery level, and network conditions.

• Notifications: Uses Bluetooth Low Energy (BLE) to send alerts such as incoming call notifications.

• Firmware Management: When new firmware is available, the app will guide you step-by-step through updating the GO! exec.

Best practices

• Keep your phone within the recommended 30 m (100 ft) Wi-Fi range.

• Enable Low Data Mode (iOS) or Metered/Data Saver (Android) when connected to the GO! exec Wi-Fi.

• Allow the app to perform firmware updates when prompted.

• Keep Bluetooth enabled so you can receive device notifications.

Troubleshooting app connection issues

• Ensure the GO! exec is powered on and broadcasting Wi-Fi

• Verify you are connected to the correct SSID (Iridium-XXXXXX)

• Re-scan the QR code if the app does not connect

• Restart your smart device’s Wi-Fi

• Update the Iridium GO! exec app to the latest version

If issues persist, restart the Iridium GO! exec and try connecting again.