Iridium GO! - How to Insert the SIM card

Before using your Iridium GO!, make sure the SIM card is installed correctly. Follow the steps below to safely insert the SIM card into the device.

1. Remove the battery cover by loosening the set screw. A coin can be used if a screwdriver is not available.

2. Remove the Iridium GO! battery.

3. Locate the SIM card door inside the battery compartment.

4. Unlock the SIM card door by sliding it to the unlocked position.

5. Gently lift the SIM card door once it is unlocked.

6. Place the SIM card into the guides on the SIM card door.

7. Close the SIM card door and slide it back into the locked position. Make sure the cut corner of the SIM card aligns with the cut corner of the slot.

8. Reinsert the battery.

9. Attach the battery cover and tighten the set screw to secure it.

Once the SIM card is installed, the Iridium GO! is ready to be powered on and connected to the network.