Iridium GO! - Charging the Battery

Follow the steps below to charge the battery in your Iridium GO! device.

1. Locate the USB charging port on the side of the device and open the protective USB cover.

2. Insert the provided Micro-USB cable into the charging port.

3. Plug the other end of the cable into a wall outlet using the supplied AC adapter, or into a 12-volt DC outlet using the supplied vehicle charger.

4. The battery can take up to three hours to reach a full charge. For best results, especially before first use or after long storage, allowing the device to charge for 12 to 24 hours is recommended.

5. Once charging is complete, disconnect the cable and close the USB cover to maintain water and dust protection.