Iridium Extreme - Power On Messages

Bad Card 

Your SIM card has been damaged or incorrectly issued. 

Check Card 

The SIM card is damaged or inserted the wrong way. 

Denied 

Your phone has seen a network but has been denied access. 

SIM PIN 

Enter the four- to eight-digit SIM card PIN code provided by your service provider and press OK to proceed. See “Using the Security Menu” on page 179, for more information about your SIM. 

Invalid Account 

Check that your SIM card is active. Contact your service provider.

Phone PIN 

The phone has been locked. To unlock the phone, you must enter the correct Phone PIN number. 

PIN Blocked 

When the PIN number has been entered incorrectly three times in a row, the phone automatically blocks the PIN. To unblock the pin, enter the PUK1 code for the phone by entering **05* from the main screen. The PUK codes will come with your new SIM, or please contact customercare@bluecosmo.com 

1. Turn phone ON. Phone will display PIN BLOCKED
2. Enter **05* press Green button
3. You will be prompted for the SIM PUK Code
4. Enter the PUK1 code
5. Scroll down to 'New PIN'
6. Enter 1111 (1111 is the default)
7. Scroll down to 'Verify New PIN'
8. Enter 1111 and press OK/Green button
9. The phone will now be unblocked and show 'COMPLETED'. The new SIM PIN is 1111.

PIN 2 Blocked 

When the PIN2 number has been entered incorrectly three times in a row, the phone automatically blocks the PIN. 

To unblock the PIN2 enter the PUK2 code for the phone by entering **052* from the main screen. 
NOTE: PIN2/PUK2 is only used for enabling and disabling restricted dialing on a phone.

Registered 

Your phone is now registered with the network. 

Searching for Iridium... 

The phone is attempting to establish communications with the satellite network. This message appears while your phone searches for a network connection.

CAUTION! You have not configured the GEOS Service 

This phone provides the option to use a 3rd party, emergency response service offered by GEOS for the SOS button. Additional details are included in a GEOS brochure in the packaging with your phone or on Iridium.com. If you decide to use the service by selecting “Use”, you will then be prompted to confirm you have registered at www.geosalliance.com/iridium from your home or office computer. Once you register, select “OK” on your phone and the settings for using GEOS will automatically be stored in your phone. Once stored and registered, you will be set up to use GEOS provided that you have a valid SIM card and properly use the phone. Only use the SOS button in emergencies and do not place false SOS calls to GEOS. Additional terms of use are described on the www.geosresponse.com/terms-and-conditions.html page. If you decide not to use the GEOS service, scroll down and select “Do not use” and you will then be asked to confirm that you do not wish to use the GEOS Service by selecting “OK”. Next, you will then be prompted to store an emergency call and emergency message recipient for the SOS button. You are responsible for the accuracy of these entries and the responsiveness of any emergency contacts that you designate and program in your phone. 

CAUTION! Emergency call recipient has not been configured. Refer to user guide and edit. 

Emergency Actions is set to Message and Call or Call Only and a Call Recipient has not been configured. See the Iridium Extreme manual Chapter 14: GPS and Location Based Services for information on configuring the Emergency Call Recipient. 

Press Edit to configure the Emergency Call Recipient or Cancel to proceed to the main window. 

CAUTION! Emergency SMS recipient has not been configured. Refer to user guide and edit. 

Emergency Actions is set to Message and Call or Message Only and SMS contact has not been configured. See Iridium Extreme manual Chapter 14: GPS and Location Based Services for information on configuring the Message recipient. 

Press Edit to configure the Message Recipient or Cancel to proceed to the main window.

PUK Blocked - Contact Supplier

If PUK 1 has been burned out from too many incorrect attempts, the SIM card will need replacement. The PUK 2 code is only used for enabling and disabling restricted dialing on a phone. Contact customercare@bluecosmo.com to replace the SIM card.