This guide explains how to access the Hughes 9202M web console using a Wi-Fi-connected device. The web console lets you view terminal status, confirm registration, and assist with satellite pointing during setup.
You can complete these steps before or after the terminal is registered on the Inmarsat network. If completed before registration, the web console can help you identify and point to the correct satellite.
1. Turn on the wireless network radio by pressing the Wi-Fi button to the far left of the LCD display for 3 seconds. When the Wi-Fi signal is enabled, you will see the wireless icon on the display.
NOTE: This process can be completed before or after registration on the Inmarsat Satellite Network. If done before, the web console can assist with pointing to the correct satellite.
2. Connect to the terminals' Wi-Fi network. The terminal’s default site ID will be 'Hughes 9202'.
3. Open a browser and navigate to 192.168.128.100 to access the Web Console Home.
These are the minimum computer system requirements for successful interface with the Satellite Terminal: Microsoft Internet Explorer (IE8 or above), Edge, Firefox or Safari. Chrome can be used but does not support downloading files from the Support page.
4. Once the Web Console loads you may use pointing assistance to establish connection, check usage, or manage your connection settings.
Comments
0 comments
Article is closed for comments.